Release Coating
First of all, we coat the PET film with one layer of release agent.
Printing
Print the tailored artworks on the film according to the confirmed pre-printing file, samples or special panton no as requirement. In this process, we coat one layer of glue to the film, what types of glue to be used for film is depending on the material of the substrate on which customer wants to transfer the design.
Solidification
The printed film will be left in a solidified room to make the ink and glue solidification for more than 24 hours. This room will be under certain temperature and humidity.
The preliminary inspection
Quality inspection is applied to every batch of printing. Color match checking and actual heat transfer process onto same material as customer products to confirm the release and glue feature to avoid quality accident in the following production process in the warehouse of customer.
Slitting or Die cutting and Winding
This process is to slitting the big rolls into the height for customer using and winding as required by customers or die-cutting for IML customer also
100% full inspection
With experienced quality control staffs, each single meter of printing is inspected. All defective printing will be removed from the actual printing to ensure the quality of the print you get in hand.
Packing
Each printed film roll will be marked product identification (order number, plate number, the number of meters, customer name) and wrap vinyl coverage and put into carton boxes. The cartons also will be marked carton identification (plate no, rolls quantity, date, customer name). If there is only one or two cartons of your order. If there are many cartons, dozen of cartons will be packed by pallet, then wrapped by preservative film and packing belt. Pallet ,preservative film and packing belt may protect your film very well and keep the film in good quality in transportation.